Investigating the impact of soil properties, application rates and environmental conditions on pyroxasulfone dissipation and its ecotoxicological effects on soil health in aridisols of Punjab.

This study is to understand the fate and ecological consequences of pyroxasulfone in aridisols of Punjab, a detailed dissipation study in soil, its influence on soil enzymes, microbial count and succeeding crops was evaluated. Half-lives (DT50) increased with an increase in the application rate of pyroxasulfone. Dissipation of pyroxasulfone decreased with increase in organic matter content of soil and was slower in clay loam soil (DT50 12.50 to 24.89) followed by sandy loam (DT50 8.91 to 17.78) and loamy sand soil (DT50 6.45 to 14.89). Faster dissipation was observed under submerged conditions (DT50 2.9 to 20.99 days) than under field capacity conditions (DT50 6.45 to 24.89 days). Dissipation increased with increase in temperature with DT50 varying from 6.46 to 24.88, 4.87 to 22.89 and 2.97 to 20.99 days at 25 ± 2, 35 ± 2 and 45 ± 2 °C, respectively. Dissipation was slower under sterile conditions and about 23.87- to 33.74-fold increase in DT50 was observed under sterile conditions as compared to non-sterile conditions. The application of pyroxasulfone showed short-lived transitory effect on dehydrogenase, alkaline phosphatase and soil microbial activity while herbicide has non-significant effect on soil urease activity. PCA suggested that dehydrogenase and bacteria were most sensitive among enzymatic and microbial activities. In efficacy study, pyroxasulfone effectively controlled Phalaris minor germination, with higher efficacy in loamy sand soil (GR50 2.46 µg mL-1) as compared to clay loam soil (GR50 5.19 µg mL-1).

[Determination of 24 elements migration in Yixing clay pottery by inductively coupled plasma mass spectrometry].

OBJECTIVE: To establish an analytical method for determining the migration of 24 elements in Yixing clay pottery in 4% acetic acid simulated solution by inductively coupled plasma mass spectrometry. METHODS: Four types of Yixing clay pottery, including Yixing clay teapot, Yixing clay kettle, Yixing clay pot, and Yixing clay electric stew pot, were immersed in 4% acetic acid as a food simulant for testing. The migration amount of 24 elements in the migration solution was determined using inductively coupled plasma mass spectrometry. RESULTS: Lithium, magnesium, aluminum, iron, and barium elements with a mass concentration of 1000 µg/L; Lead, cadmium, total arsenic, chromium, nickel, copper, vanadium, manganese, antimony, tin, zinc, cobalt, molybdenum, silver, beryllium, thallium, titanium, and strontium elements within 100 µg/L there was a linear relationship within, the r value was between 0.998 739 and 0.999 989. Total mercury at 5.0 µg/L, there was a linear relationship within, the r value of 0.995 056. The detection limit of the elements measured by this method was between 0.5 and 45.0 µg/L, the recovery rate was 80.6%-108.9%, and the relative standard deviation was 1.0%-4.8%(n=6). A total of 32 samples of four types of Yixing clay pottery sold on the market, including teapots, boiling kettles, casseroles, and electric stewing pots, were tested. It was found that the migration of 16 elements, including beryllium, titanium, chromium, nickel, cobalt, zinc, silver, cadmium, antimony, total mercury, thallium, tin, copper, total arsenic, molybdenum, and lead, were lower than the quantitative limit. The element with the highest migration volume teapot was aluminum, magnesium, and barium; The kettle was aluminum and magnesium; Casserole was aluminum, magnesium, and lithium; The electric stew pot was aluminum. CONCLUSION: This method is easy to operate and has high accuracy, providing an effective and feasible detection method for the determination and evaluation of element migration in Yixing clay pottery.

Evaluating the agronomic efficiency of alternative phosphorus sources applied in Brazilian tropical soils.

Understanding the efficacy of alternative phosphorus (P) sources in tropical soils is crucial for sustainable farming, addressing resource constraints, mitigating environmental impact, improving crop productivity, and optimizing soil-specific solutions. While the topic holds great importance, current literature falls short in providing thorough, region-specific studies on the effectiveness of alternative P sources in Brazilian tropical soils for maize cultivation. Our aim was to assess the agronomic efficiency of alternative P sources concerning maize crop (Zea mays L.) attributes, including height, shoot dry weight, stem diameter, and nutrient accumulation, across five Brazilian tropical soils. In greenhouse conditions, we carried out a randomized complete block design, investigating two factors (soil type and P sources), evaluating five tropical soils with varying clay contents and three alternative sources of P, as well as a commercial source and a control group. We evaluated maize crop attributes such as height, dry weight biomass, and nutrient accumulation, P availability and agronomic efficiency. Our results showed that, although triple superphosphate (TSP) exhibited greater values than alternative P sources (precipitated phosphorus 1, precipitated phosphorus 2 and reactive phosphate) for maize crop attributes (e.g., height, stem diameter, shoot dry weight and phosphorus, nitrogen, sulfur, calcium and magnesium accumulation). For instance, PP1 source increased nutrient accumulation for phosphorus (P), nitrogen (N), and sulfur (S) by 37.05% and 75.98% (P), 34.39% and 72.07% (N), and 41.94% and 72.69% (S) in comparison to PP2 and RP, respectively. Additionally, PP1 substantially increased P availability in soils with high clay contents 15 days after planting (DAP), showing increases of 61.90%, 99.04%, and 38.09% greater than PP2, RP, and TSP. For Ca and Mg accumulation, the highest values were found in the COxisol2 soil when PP2 was applied, Ca = 44.31% and 69.48%; and Mg = 46.23 and 75.79%, greater than PP1 and RP, respectively. Finally, the highest values for relative agronomic efficiency were observed in COxisol2 when PP1 was applied. The precipitated phosphate sources (PP1 and PP2) exhibited a similar behavior to that of the commercial source (TSP), suggesting their potential use to reduce reliance on TSP fertilization, especially in soils with low clay contents. This study emphasized strategies for soil P management, aimed at assisting farmers in enhancing maize crop productivity while simultaneously addressing the effectiveness of alternative P sources of reduced costs.

Modification of bentonite with black cotton soil and carboxyl methyl cellulose for the enhancement of hydraulic performance of geosynthetic clay liners.

Geosynthetic clay liners (GCLs) are mostly used as flow barriers in landfills and waste containments due to their low hydraulic conductivity to prevent the leachate from reaching the environment. The self-healing and swell-shrink properties of soft clays (expansive soils) such as bentonite enable them as promising materials for the GCL core layers. However, it is important to modify their physico-chemical properties in order to overcome the functional limitations of GCL under different hydraulic conditions. In the present study, locally available black cotton soil (BCS) is introduced in the presence of an anionic polymer named carboxymethyl cellulose (CMC) as an alternative to bentonite to enhance the hydraulic properties of GCL under different compositions. The modified GCL is prepared by stitching the liner with an optimum percentage of CMC along with various percentages of BCS mixed with bentonite. Hydraulic conductivity tests were performed on the modified GCL using the flexi-wall permeameter. The results suggest that the lowest hydraulic conductivity of 4.58 × 10-10 m/s is obtained when 25% of BCS is blended with bentonite and an optimum 8% CMC and further addition of BCS results in the reduction of the hydraulic conductivity.

High molecular weight hyaluronic acid vectorised with clay provides long-term hydration and reduces skin brightness.

BACKGROUND: Hyaluronic acid (HA) is a widely used active cosmetic ingredient. Its multiple skin care benefits are modulated by its molecular weight. Low molecular weight (LMW) HA can penetrate the skin, but high molecular weight (HMW) HA remains at the surface. Here, we assessed how vectorization of HMW HA with bentonite clay-achieved with an innovative technology-enhances its cosmetic and hydrating properties. MATERIALS AND METHODS: The two HA forms were applied to skin explants; their penetration and smoothing effects were monitored by Raman spectroscopy and scanning electron microscopy. The two forms were biochemically characterised by chromatography, enzyme sensitivity assays, and analysis of Zeta potential. Cosmetics benefits such as, the smoothing effect of vectorised-HA was assessed in ex vivo experiments on skin explants. A placebo-controlled clinical study was finally conducted applying treatments for 28 days to analyse the final benefits in crow's feet area. RESULTS: Raman spectroscopy analysis revealed native HMW HA to accumulate at the surface of skin explants, whereas vectorised HMW HA was detected in deeper skin layers. This innovative vectorisation process changed the zeta potential of vectorised HMW HA, being then more anionic and negative without impacting the biochemical structure of native HA. In terms of cosmetic benefits, following application of vectorised HMW HA ex vivo, the skin's surface was visibly smoother. This smoothing was clinically confirmed, with a significant reduction in fine lines. CONCLUSION: The development of innovative process vectorising HMW HA allowed HMW HA penetration in the skin. This enhanced penetration extends the clinical benefits of this iconic cosmetic ingredient.

Electroosmotic flow in soft clay and measures to promote movement under direct current electric field.

Electroosmosis has been proposed as a technique to reduce moisture and thus increase the stability of soft clay. However, its high energy consumption and uneven reinforcement effect has limited its popularization and application in practical engineering. This paper presents the results of some electrokinetic tests performed on clayey specimens with different electrification time and anode boundary conditions. The results indicate that the timing of the formation of electroosmotic flow (EF) by the water originally contained in different soil cross sections, from the anode to the cathode, varies. The measuring soil cross section nearest the anode first reached the limiting water content of 22%±3% and electroosmosis had to be stopped. Water injection into the anode during electroosmosis enhanced further drainage of other four measuring soil cross sections until the second soil cross section from the anode reached the limiting water content of 30%±2%. Electroosmosis with water injection into the anode technique provides more uniform reinforcement, increasing EF, and environmental protection. The experimental results highlighted the relevant and expected contribution of water injection into the anode on the effectiveness of the electroosmotic treatment as a soft clay improvement technique.

Eco-friendly flame-retardant bamboo fiber/polypropylene composite based on the immobilization of halloysite nanotubes by tannic acid-Fe3+ complex.

Bamboo fibers (BF), as an important sustainable natural material, are becoming a hot alternative to synthetic fibers for the reinforcement of polypropylene (PP)-based composites. However, the weak interfacial compatibility between BF and PP as matrix and their inherent flammability limit the practical application of BF/PP composites (BPC). Here, a fire-safe BPC was fabricated by constructing flame-retardant interfacial layers containing tannic acid (TA)-Fe3+ complex and halloysite nanotubes (HNTs) on the fiber matrix followed by a hot-pressing process. The results showed that the interfacial chelating of TA with Fe3+ improved the dispersion of HNTs on the fibers and the interfacial interactions within the fiber matrix, resulting in the as-fabricated composite with significantly improved mechanical properties and water resistance. In addition, the flame-retardant composite exhibited higher thermal stability and enhanced residual char content. Moreover, the composite possessed significant flame-retardant performances with a reduction of 23.75 % in the total heat release and 32.44 % in the total smoke production, respectively, owing to the flame retarding in gaseous phase and condensed phase of TA-Fe3+@HNTs layers. This work offers a green and eco-friendly strategy to address the inherent problems of BPC material in terms of fire safety and interfacial compatibility, thus broadening their applications in the automotive interior and construction industries.

Improving feed intake and rumen fermentation in lambs using mixed-dimensional attapulgite clay to adsorb naturally occurring mycotoxins.

This experiment was conducted to evaluate the effects of including a mixed-dimensional attapulgite clay (MDA) into a naturally moldly diet for Hu lambs. Fifty male Hu lambs with similar initial body weight (28.24 ±â€…1.80 kg) were randomly allocated into five dietary treatments: a basal diet containing naturally occurring mycotoxins with 0, 0.5, 1.0, and 2.0 kg/t MDA, and basal diet with a commercial mycotoxin adsorbent Solis with montmorillonite as the major component at 1 kg/t. Both MDA and Solis increased average daily gain (ADG) and dry matter intake (DMI; P ≤ 0.004), and there was no difference in growth performance between MDA and Solis (P ≥ 0.26). The final body weight, DMI, and ADG were linearly increased with increasing MDA supplementation (P < 0.01). Lambs treated with both MDA and Solis demonstrated greater apparent digestibility of dry matter (DM), organic matter (OM), and energy compared with the control group (P ≤ 0.03), and there were no differences in nutrient digestibilities between MDA and Solis (P ≥ 0.38). Digestibility of CP was linearly increased with the increasing MDA supplementation (P = 0.01). Neither MDA nor Solis affected rumen total volatile fatty acid (TVFA) concentration (P ≥ 0.39), but decreased the acetate-to-propionate ratio and molar proportion of n-butyrate (P ≤ 0.01), and MDA also increased the concentration of ammonia (P = 0.003). Besides, increasing MDA supplementation linearly reduced the acetate-to-propionate ratio and molar proportion of n-butyrate (P = 0.01), but linearly and quadratically increased the concentration of ammonia (P ≥ 0.003). These results showed that the incorporation of MDA into a naturally moldy diet of Hu lambs yielded comparable results to the Solis product, with higher growth performance and nutrient digestibility but lower acetate-to-propionate ratio observed. In conclusion, including ≥ 1 kg/t of MDA in high mycotoxin risk diets for growing lambs improves feed intake and rumen fermentation.

The issue of mycotoxin-contaminated animal feed has consistently presented a significant challenge in relation to animal health and production. The mixed-dimensional attapulgite clay (MDA) has been proven effective in binding polar mycotoxins such as aflatoxin, while also effectively adsorbing hydrophobic or weakly polar mycotoxins such as zearalenone (ZEN) and ochratoxin. Therefore, this study was undertaken to assess the impact of MDA inclusion in mycotoxin-contaminated diets on performance and rumen fermentation variables in lambs. The results indicated that MDA not only significantly improved the growth performance and nutrient digestibility of Hu lambs but also enhanced the molar proportion of propionate and ammonia concentration, and reduced the acetate to propionate ratio and the molar proportion of n-butyrate.

Gypsum amendment of agricultural fields to decrease phosphorus losses - Evidence on a catchment scale.

Amending agricultural fields with gypsum has been proposed as a cost-effective measure to reduce P load on coastal waters. We treated 1490 ha of clayey fields with phosphogypsum (4 t ha-1) in Southwest Finland and monitored the recipient river with online sensors and water sampling for the preceding spring and 5 years after the amendment. Gypsum immediately decreased the riverine fluxes, the effect lasting at least 5 years for particulate P (PP), total suspended solids (TSS), and dissolved organic C (DOC) and 1-2 years for dissolved reactive P (DRP). Compared with an upstream control area, the fluxes of PP, TSS, and DOC decreased by 15%, 25%, and 8.9%, respectively, as a 5-year average. Assuming the change in the fluxes occurred only due to gypsum, the amended fields showed 35%, 59%, and 64% lower losses for PP, TSS, and DOC than the unamended ones. More than half of the gypsum remained in the soil even after 5 years; thus, although the efficiency of gypsum lessened over time, its residual effect may be present. However, the difference in the erodibility between the control and treatment areas impacted the validity of the results, especially as the pre-gypsum period was short. In addition, the performance of gypsum showed spatial variation.

Deciphering silver nanoparticles perturbation effects and risks for soil enzymes worldwide: Insights from machine learning and soil property integration.

Globally extensive research into how silver nanoparticles (AgNPs) affect enzyme activity in soils with differing properties has been limited by cost-prohibitive sampling. In this study, customized machine learning (ML) was used to extract data patterns from complex research, with a hit rate of Random Forest > Multiple Imputation by Chained Equations > Decision Tree > K-Nearest Neighbors. Results showed that soil properties played a pivotal role in determining AgNPs' effect on soil enzymes, with the order being pH > organic matter (OM) > soil texture ≈ cation exchange capacity (CEC). Notably, soil enzyme activity was more sensitive to AgNPs in acidic soil (pH < 5.5), while elevated OM content (>1.9 %) attenuated AgNPs toxicity. Compared to soil acidification, reducing soil OM content is more detrimental in exacerbating AgNPs' toxicity and it emerged that clay particles were deemed effective in curbing their toxicity. Meanwhile sand particles played a very different role, and a sandy soil sample at > 40 % of the water holding capacity (WHC), amplified the toxicity of AgNPs. Perturbation mapping of how soil texture alters enzyme activity under AgNPs exposure was generated, where soils with sand (45-65 %), silt (< 22 %), and clay (35-55 %) exhibited even higher probability of positive effects of AgNPs. The average calculation results indicate the sandy clay loam (75.6 %), clay (74.8 %), silt clay (65.8 %), and sandy clay (55.9 %) texture soil demonstrate less AgNPs inhibition effect. The results herein advance the prediction of the effect of AgNPs on soil enzymes globally and determine the soil types that are more sensitive to AgNPs worldwide.

Natural Clay-Modified Piezocatalytic Membrane for Efficient Removal of Coliform Bacteria from Wastewater.

In the modern era, water pollution, especially from industries, agricultural farms, and residential areas, is caused by the release of a large scale of heavy metals, organic pollutants, chemicals, etc., into the environment, posing a serious threat to aquatic ecosystems and nature. Moreover, untreated sewage waste discharged directly into nearby water bodies can cause various diseases to mankind due to the high load of fecal coliform bacteria. This work demonstrates the development of a biocompatible, cost-effective, highly robust, efficient, flexible, freestanding, and reusable membrane using naturally formed biocompatible kaolinite clay-doped poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for effective piezodynamic destruction of coliform bacteria. In this study, Escherichia coli (E. coli) and Enterococcus faecalis (E. faecalis) have been used to evaluate the mechanical stimulus-responsive antibacterial efficacy of the nanocomposite membrane. The membrane can effectively eradicate nearly 99% viable E. coli and 97% E. faecalis within a span of 40 min under mechanical stimulation (soft ultrasound ∼15 kHz). To further understand the mechanism, an evaluation of reactive oxygen species and bacterial FESEM was performed. These studies revealed that bacterial cells suffered severe visible cell damage after 40 min of piezocatalysis, elucidating the fact that the synthesized membrane is capable of producing a superior piezodynamic antibacterial effect.

Biochar influences nitrogen and phosphorus dynamics in two texturally different soils.

Nitrogen (N) and phosphorus (P) are vital for crop growth. However, most agricultural systems have limited inherent ability to supply N and P to crops. Biochars (BCs) are strongly advocated in agrosystems and are known to improve the availability of N and P in crops through different chemical transformations. Herein, a soil-biochar incubation experiment was carried out to investigate the transformations of N and P in two different textured soils, namely clay loam and loamy sand, on mixing with rice straw biochar (RSB) and acacia wood biochar (ACB) at each level (0, 0.5, and 1.0% w/w). Ammonium N (NH4-N) decreased continuously with the increasing incubation period. The ammonium N content disappeared rapidly in both the soils incubated with biochars compared to the unamended soil. RSB increased the nitrate N (NO3-N) content significantly compared to ACB for the entire study period in both texturally divergent soils. The nitrate N content increased with the enhanced biochar addition rate in clay loam soil until 15 days after incubation; however, it was reduced for the biochar addition rate of 1% compared to 0.5% at 30 and 60 days after incubation in loamy sand soil. With ACB, the net increase in nitrate N content with the biochar addition rate of 1% remained higher than the 0.5% rate for 60 days in clay loam and 30 days in loamy sand soil. The phosphorus content remained consistently higher in both the soils amended with two types of biochars till the completion of the experiment.

Impact of dry density and incomplete saturation on microbial growth in bentonite clay for nuclear waste storage.

AIMS: Many countries are in the process of designing a deep geological repository (DGR) for long-term storage of used nuclear fuel. For several designs, used fuel containers will be placed belowground, with emplacement tunnels being backfilled using a combination of highly compacted powdered bentonite clay buffer boxes surrounded by a granulated "gapfill" bentonite. To limit the potential for microbiologically influenced corrosion of used fuel containers, identifying conditions that suppress microbial growth is critical for sustainable DGR design. This study investigated microbial communities in powdered and gapfill bentonite clay incubated in oxic pressure vessels at dry densities between 1.1 g cm-3 (i.e. below repository target) and 1.6 g cm-3 (i.e. at or above repository target) as a 1-year time series. RESULTS: Our results showed an initial (i.e. 1 month) increase in the abundance of culturable heterotrophs associated with all dry densities <1.6 g cm-3, which reveals growth during transient low-pressure conditions associated with the bentonite saturation process. Following saturation, culturable heterotroph abundances decreased to those of starting material by the 6-month time point for all 1.4 and 1.6 g cm-3 pressure vessels, and the most probable numbers of culturable sulfate-reducing bacteria (SRB) remained constant for all vessels and time points. The 16S rRNA gene sequencing results showed a change in microbial community composition from the starting material to the 1-month time point, after which time most samples were dominated by sequences associated with Pseudomonas, Bacillus, Cupriavidus, and Streptomyces. Similar taxa were identified as dominant members of the culture-based community composition, demonstrating that the dominant members of the clay microbial communities are viable. Members of the spore-forming Desulfosporosinus genus were the dominant SRB for both clay and culture profiles. CONCLUSIONS: After initial microbial growth while bentonite was below target pressure in the early phases of saturation, microbial growth in pressure vessels with dry densities of at least 1.4 g cm-3 was eventually suppressed as bentonite neared saturation.

Effects of forest regeneration types on phosphorus fractions of soil aggregates in subtropical forest.

Soil aggregates are important for the storage and availability of phosphorus in the soil. However, how forest regeneration types affect phosphorus fractions of soil aggregates remains unclear. In this study, we examined the composition of aggregate particle size, phosphorus fractions, phosphorus sorption capacity index (PSOR), legacy phosphorus index (PLGC) and degree of phosphorus saturation by Mehlich 3 (DPSM3) in bulk soils and soil aggregates of Castanopsis carlesii secondary forest (slight disturbance), C. carlesii human-assisted regeneration forest (moderate disturbance), and Cunninghamia lanceolata plantation (severe disturbance), aiming to explore the impact of forest regeneration types on phosphorus availability and supply potential of bulk soils and soil aggregates. The results showed that forest regeneration types significantly influenced the composition of soil aggregates. The proportion of coarse macroaggregates (>2 mm) in the soil of C. carlesii secondary forest and human-assisted regeneration forest was significantly higher than that in the C. lanceolata plantation, while the proportion of silt and clay fraction (<0.053 mm) showed an opposite trend. The composition of soil aggregates significantly affected the contents of different phosphorus fractions. The contents of soil labile phosphorus fractions (PSOL and PM3) decreased as aggregate particle size decreased. The contents of soil total phosphorus (TP), total organic phosphorus (Po), mode-rately labile phosphorus fractions (PiOH and PoOH), and occluded phosphorus (POCL), as well as PSOR and PLGC, exhibited a trend of decreasing at the beginning and then increasing as particle size decreased. The contents of TP, Po, and PiOH in coarse and silt macroaggregates was significantly higher than that in fine macroaggregates (0.25-2 mm) and microaggregates (0.053-0.25 mm). Forest regeneration types significantly influenced the contents of phosphorus fractions of bulk soils and soil aggregates. The contents of TP, Po, PSOL, and PM3 in the soil of C. carlesii secondary forests was significantly higher than that in C. carlesii human-assisted regeneration forest and C. lanceolata plantation. The contents of PSOL and PM3 in different-sized aggregates of C. carlesii secondary forests were significantly higher than that in the C. lanceolata plantation. Forest regeneration types significantly influenced the composition and supply potential of phosphorus fractions in soil aggregates. The proportions of PSOL, and PM3 to TP in different-sized soil aggregates were significantly lower in C. carlesii human-assisted regeneration forest compared with C. carlesii secondary forest. PSOR and DPSM3 in different-sized soil aggregates were significantly lower in C. lanceolata plantation than that in C. carlesii secondary forest. Overall, our results indicated that natural regeneration is more favorable for maintaining soil phosphorus availability, and that forest regeneration affects soil phosphorus availa-bility and its supply potential by altering the composition of soil aggregates.

A Fe(III) intercalated clay nanoplatform for combined chemo/chemodynamic therapy.

A Fe(III) intercalated montmorillonite nanoplatform (Fe-MMT) was engineered for doxorubicin (DOX) loading. The constructed Fe-MMT/DOX nanoplatform could not only improve the production of H2O2 to enhance chemodynamic therapy but interfere with DNA damage repair to amplify the efficacy of DOX, proving an ideal combination of chemotherapy and chemodynamic therapy.

Effects of soil on the development, survival, and oviposition of Culex quinquefasciatus (Diptera: Culicidae) mosquitoes.

BACKGROUND: Water quality is known to influence the development and survival of larval mosquitoes, which affects mosquito-borne pathogen transmission as a function of the number of mosquitoes that reach adulthood and blood feed. Although water properties are known to affect mosquito development, few studies have investigated the link among soil properties, water quality, and mosquito development. Given the large number of ground-breeding mosquito species, this linkage is a potentially important factor to consider in mosquito ecology. In this study, we explored the effects of different soils on multiple life history parameters of the ground-breeding mosquito species Culex quinquefasciatus (Diptera: Culicidae). METHODS: Cx. quinquefasciatus larvae were reared in water combined with different soil substrates (sandy, silt, or clay loam textures) at increasing soil to water volume ratios, with and without the addition of organic matter (fish food). Gravid mosquitoes were offered different soil-water extracts to investigate soil effects on oviposition preference. RESULTS: Without the addition of organic matter, larval survival and development differed significantly among waters with different soil textures and volumes of substrate. Mosquitoes in water with clay loam soil survived longer and developed further than mosquitoes in other soil waters. Larvae survived for longer periods of time with increased volumes of soil substrate. Adding organic matter reduced the differences in larval survival time, development, and pupation among soil-water extracts. Adult female mosquitoes oviposited more frequently in water with clay loam soil, but the addition of organic matter reduced the soil effects on oviposition preference. CONCLUSIONS: This study suggests soil composition affects larval mosquito survival and development, as well as the oviposition preference of gravid females. Future studies could differentiate abiotic and biotic soil features that affect mosquitoes and incorporate soil variation at the landscape scale into models to predict mosquito population dynamics and mosquito-borne pathogen transmission.

Bacterial community shifts occur primarily through rhizosphere expansion in response to subsoil amendments.

To comprehensively evaluate the impact of agricultural management practices on soil productivity, it is imperative to conduct a thorough analysis of soil bacterial ecology. Deep-banding nutrient-rich amendments is a soil management practice that aims to improve plant growth and soil structure by addressing the plant-growth constraints posed by dense-clay subsoils. However, the response of bacterial communities to deep-banded amendments has not been thoroughly studied. To address this knowledge gap, we conducted a controlled-environment column experiment to examine the effects of different types of soil amendments (poultry litter, wheat straw + chemical fertiliser and chemical fertiliser alone) on bacterial taxonomic composition in simulated dense-clay subsoils. We evaluated the bacterial taxonomic and ecological group composition in soils beside and below the amendment using 16S rRNA amplicon sequencing and robust statistical methods. Our results indicate that deep-banded amendments alter bacterial communities through direct and indirect mechanisms. All amendments directly facilitated a shift in bacterial communities in the absence of growing wheat. However, a combination of amendments with growing wheat led to a more pronounced bacterial community shift which was distinct from and eclipsed the direct impact of the amendments and plants alone. This indirect mechanism was evidenced to be mediated primarily by plant growth and hypothesised to result from an enhancement in wheat root distribution, density and rhizodeposition changes. Therefore, we propose that subsoil amendments regardless of type facilitated an expansion in the rhizosphere which engineered a substantial plant-mediated bacterial community response within the simulated dense-clay subsoils. Overall, our findings highlight the importance of considering the complex and synergistic interactions between soil physicochemical properties, plant growth and bacterial communities when assessing agricultural management strategies for improving soil and plant productivity.

Evidence for immune activation in pathogenesis of the HLA class II associated disease, podoconiosis.

Available evidences suggest that podoconiosis is triggered by long term exposure of bare feet to volcanic red clay soil particles. Previous genome-wide studies in Ethiopia showed association between the HLA class II region and disease susceptibility. However, functional relationships between the soil trigger, immunogenetic risk factors and the immunological basis of the disease are uncharted. Therefore, we aimed to characterise the immune profile and gene expression of podoconiosis patients relative to endemic healthy controls. Peripheral blood immunophenotyping of T cells indicated podoconiosis patients had significantly higher CD4 and CD8 T cell surface HLA-DR expression compared to healthy controls while CD62L expression was significantly lower. The levels of the activation markers CD40 and CD86 were significantly higher on monocytes and dendritic cell subsets in patients compared to the controls. RNA sequencing gene expression data indicated higher transcript levels for activation, scavenger receptors, and apoptosis markers while levels were lower for histones, T cell receptors, variable, and constant immunoglobulin chain in podoconiosis patients compared to healthy controls. Our finding provides evidence that podoconiosis is associated with high levels of immune activation and inflammation with over-expression of genes within the pro-inflammatory axis. This offers further support to a working hypothesis of podoconiosis as soil particle-driven, HLA-associated disease of immunopathogenic aetiology.

Recent advances in clay minerals for groundwater pollution control and remediation.

Clay minerals are abundant on Earth and have been crucial to the advancement of human civilization. The ability of clay minerals to absorb chemicals is frequently utilized to remove hazardous compounds from aquatic environments. Moreover, clay-based adsorbent products are both environmentally acceptable and affordable. This study provides an overview of advances in clay minerals in the field of groundwater remediation and related predictions. The existing literature was examined using data and information aggregation approaches. Keyword clustering analysis of the relevant literature revealed that clay minerals are associated with groundwater utilization and soil pollution remediation. Principal component analysis was used to assess the relationships among clay mineral modification methods, pollutant properties, and the Langmuir adsorption capacity (Qmax). The results demonstrated that pollutant properties affect the Qmax of pollutants adsorbed by clay minerals. Systematic cluster analysis was utilized to classify the collected data and investigate the relationships. The pollution adsorption mechanism of the unique structure of clay minerals was investigated based on the characterization results. Modified clay minerals exhibited changes in surface functional groups, internal structure, and pHpzc. This review provides a summary of recent clay-based materials and their applications in groundwater remediation, as well as discussions of their challenges and future prospects.